Tektronix DPO4032, User Manual, Page: 217 / 359

Analyze Waveform Data
3. Turn multipurpose knob a to select the
speci fi c measurement. If needed, then turn
multipurpose knob b to select the channel to
measure on.
4. To remove a measurement, push Remove
Measurement , turn multipurpose knob a to
select the speci fi c measurement, and push
OK Remove Measurement on the side-bezel
menu.
Quick Tips
To remove all measurements, select Remove All Measurements .
A symbol appears instead of the expected numerical measurement if a vertical clipping condition exists. Part of the
waveform is above or below the display. To obtain a proper numerical measurement, turn the vertical scale and position
knobs to make all of the waveform appear in the display.
MSO4000 and DPO4000 Series Oscilloscopes User Manual 191