Tektronix DPO4032, User Manual, Page: 296 / 359

Application Examples
Using Autoset
To quickly display a signal:
1. Push Autoset .
The oscilloscope sets vertical, horizontal, and trigger controls automatically. You can manually adjust any of these controls if you
need to optimize the display of the waveform.
When you are using more than one channel, the autoset function sets the vertical controls for each channel and uses the
lowest-numbered active channel to set the horizontal and trigger controls.
Selecting Automatic Measurements
The oscilloscope can take automatic measurements of most displayed signals. To measure signal frequency and peak-to-peak
amplitude:
270 MSO4000 and DPO4000 Series Oscilloscopes User Manual