Tektronix DPO4032, User Manual, Page: 331 / 359

Application Examples
Basic Strategy
First, you will display and acquire the bus signal by setting up the bus parameters and trigger. Then, you will search through each
packet with the search/mark functions.
NOTE. Triggering on I
2
C, SPI, CAN, LIN, FlexRay, RS-232, RS-422, RS-485, UART, I
2
S, Left Justi fi ed, Right Justi fi ed, and TDM
bus signals requires use of an appropriate DPO4EMBD, DPO4AUTO, DPO4AUTOMAX, or DPO4COMP, DPO4AUDIO Serial
Triggering and Analysis Module. Triggering on Parallel bus signals requires use of an MSO4000 Series oscilloscope.
MSO4000 and DPO4000 Series Oscilloscopes User Manual 305