Tektronix DPO4032, User Manual, Page: 105 / 359

Get Acquainted with the Instrument
Rear-Panel Connectors
1. Trigger Out . Use the trigger signal output
to synchronize other test equipment
with your oscilloscope. A LOW to
HIGH transition indicates that the trigger
occurred. The logic level for Vout (HI) is
≥ 2.5V open circuit; ≥ 1.0 V into a 50 Ω load
to ground. The logic level for Vout (LO) is
≤ 0.7 V into a load of ≤ 4 mA; ≤ 0.25 V into a
50 Ω load to ground.
2. XGA Out . Use the XGA Video port (DB-15
female connector) to show the oscilloscope
display on an external monitor or projector.
3. LAN . Use the LAN (Ethernet) port (RJ-45
connector) to connect the oscilloscope to a
10/100 Base-T local area network.
MSO4000 and DPO4000 Series Oscilloscopes User Manual 79