Tektronix DPO4032, User Manual, Page: 233 / 359

Analyze Waveform Data
Taking Manual Measurements with Cursors
Cursors are on-screen markers that you position in the waveform display to take manual measurements on acquired data. They
appear as horizontal and/or as vertical lines. To use cursors on analog or digital channels:
1. Push Cursors .
This changes the cursor state. The three
states are:
No cursors appear on the screen.
Two vertical waveform cursors appear.
They are attached to the selected
analog waveform or digital waveforms.
Four screen cursors appear. Two are
vertical and two are horizontal. They
are no longer speci
fi cally attached to a
waveform.
For example, the fi rst time you push
Cursors the state might be off.
MSO4000 and DPO4000 Series Oscilloscopes User Manual 207