Reference
12
Serial Mask Testing & Serial Pattern Trigger User Manual
To set the instrument to perform mask tests, do the following procedure.
Overview
To mask test a waveform
Related control elements and resources
Prerequisites 1.
Connect the instrument to the source signal, or save the
source signal to a math or reference waveform memory
location.
Access the
Mask Setup
window
2.
From the button bar, touch Masks.
The instrument displays the Mask control window.
Select a mask
test signal
source
3.
Select the Source tab and then the channel, math, or
reference tab and then select the waveform source to
use as the mask test source. You can mask test one
waveform at a time.
Mask Test Setup
Summary of Contents for CSA7000 Series
