Serial Mask Testing & Serial Pattern Trigger User Manual
11
Reference
This chapter contains instructions for performing the following tasks:
H
Mask Testing
(starting on this page) describes how to set up and run mask
tests, as well as how to create, edit, and save user masks.
H
Communication (Comm) Triggering
(page 32) describes how to trigger on
industry-standard communication signals, and provides information on the
recovered clock (R Clk) feature.
H
Serial Pattern Trigger
(page 36) describes how to trigger on user-defined
serial data.
Mask Testing
Mask testing sets the instrument to test industry-standard communications
signals against defined masks to verify the timing, amplitude, and waveform
shape of the signal. This section provides step-by-step instructions on how to
access and operate the mask test features.
The mask testing instructions cover the following subjects:
H
Mask test setup
H
Running a mask test
H
Creating a user mask from a defined mask
H
Saving a user mask to disk
H
Recalling a user mask from disk
H
Editing a user mask
H
Creating a new user mask
H
Mask testing key points (general and optical)
Summary of Contents for CSA7000 Series
