Tektronix AFG3000 Series, User Manual

Page: 96 / 113

Operating basics
Access Protection The access protection is set to Off by default. To turn the access protection on,
do the following steps:
1. Push the front-panel
Utility button to display
the Utility menu, and then
push the -more- bezel
button twice.
2. Select Security Menu.
3. Select Access Protection
to display the password
input page.
4. Enter your password.
Use the general purpose
knob to select the
characters and push
the Enter Character
bezel button after each
selection.
As you enter the
characters of your
password, they are
displayed as a series of
asterisks (*******) on the
password input page.
If no speci
fi c password
has been previously
de
fi ned, use the default
password DEFAULT.
5. Select OK to turn the
access protection on.
NOTE. When Access Protection is on, the Change Password bezel button is
disabled.
Changing the Password Before the password is changed for the fi rst time, the default password is
DEFAULT. To change the password, do the following steps:
82 AFG3000 and AFG3000C Series User Manual