Tektronix AFG3000 Series, User Manual

Page: 71 / 113

Operating basics
3. In this page, you can set
the parameters for center
frequency, frequency
span, hold time and
select the sweep type.
Hold time represents the
amount of time that the
frequency must remain
stable after reaching the
stop frequency.
Push the -more- button
to display the second
sweep menu.
4. In this page, you can
select the sweep mode
(Repeat or Trigger) and
trigger source.
5. This is a sample
oscilloscope screen.
The top is a sample of a
sweep waveform.
6. This is a trigger output
signal.
Quick Tips For frequency sweep, you can select a sine, square, ramp, or arbitrary
waveform. Pulse, DC, and Noise waveforms cannot be selected.
Once the sweep is selected, the frequency is swept from the sweep start to
the sweep stop frequencies.
If a start frequency is lower than a stop frequency, the instrument sweeps from
the low frequency to the high frequency.
AFG3000 and AFG3000C Series User Manual 57