Tektronix AFG3000 Series, User Manual

Page: 57 / 113

Operating basics
8. To change the frequency
value, use the keypad
and Units bezel buttons.
For example, if you enter
a value "2" using the
keypad, the bezel menus
will automatically change
to Units.
After entering the
frequency value, push
the Units bezel button
or the front-panel Enter
button to complete the
entry.
You can change the
Amplitude, Phase, and
Offset values in the same
way.
9. You can also change the
frequency value using
the general purpose knob
and the arrow keys.
To increase the value,
turn the knob clockwise.
To change a speci
fi c digit,
select it by pushing the
arrow keys. Then change
it by turning the knob.
Quick Tips Use the front-panel shortcut buttons to quickly select a waveform parameter.
You can also specify a waveform parameter by using bezel menu selection.
This method does not use the front-panel shortcut buttons.
When you specify a waveform parameter using the shortcut buttons or bezel
menu selection, an active parameter is displayed in green in the graph area.
AFG3000 and AFG3000C Series User Manual 43