10 TEGAM WAY • GENEVA, OHIO 44041 • 440-466-6100 • FAX 440-466-6110 • [email protected]
15
GENERAL INFORMATION
annunciators are blanked.
2. Next depress the keypad number corresponding to the desired location.
Note that the annunciator for this location turns on and the memory contents are displayed.
3. Several stored readings can be randomly recalled by a key sequence such as:
eg. RECALL 3
RECALL 5
RECALL 2 etc.
4. To return the meter to the operate mode, depress OPR after recalling the last reading. All
active location annunciators will turn on again, together with the OPR annunciator.
NOTE:
Recalling data from unused (i.e. empty) locations will give a zero
reading.
To Erase Data Locations (Meter Mode):
1. Individual data locations can be erased by recalling the location to be cleared, followed by a
CLEAR key input. Note that the annunciator for the cleared location is turned off,and the meter
returns to OPR.
eg. RECALL 3
CLEAR
NOTE:
There is no need to clear a location if new data is ready for saving in this
location. Just STORE the new data. It will write over and delete the old.
Figure 7.