______________________________________________________________________________ STARGAS
OPERATING INSTRUCTIONS
31
2.0 -
HOW TO CONNECT THE STARGAS
To connect the STARGAS:
•
Remove the tool form the package and place it in the special trolley housing
(option).
The package should be kept in case that you need it again subsequently to
transport the tool
.
•
Connect the RPM battery cable (
46
) to the
RPM
socket (
22
).
•
Connect the ground cable (
44
) to the
COM
port (
26
).
•
Connect the temperature probe (
45
) (option) to the
TEMP
.
°C
tap (
23
).
•
Attach the battery supply cable (
43
) to the
battery socket
(
31
) and to the tested
vehicle battery (in case the vehicle is not already supplied by the mains cable).
•
Attach the mains cable (
47
) to the
mains socket
(
33
) and to the supply source
of the power mains (in case the vehicle is not already supplied by battery cable).
•
For the connection to the feeding mains, make sure that the tap has the same
VOLTAGE/FREQUENCE features as those that are written on the plate which is
located on the tool back side.
The earthing is absolutely necessary
.
Summary of Contents for STARGAS 898 LIGHT
Page 3: ...47 48 49 50 51 52...
Page 4: ...Via Provinciale 12 43038 Sala Baganza PARMA ITALY Tel 0521 837311...
Page 6: ......
