______________________________________________________________________________ STARGAS
OPERATING INSTRUCTIONS
35
3.4 -
Use of the STARGAS keyboard
To set the workshop data pr any other value by means of the keyboard of the STARGAS
follow indications below:
•
Press
MENU
and at the same time the
arrow up
or
down cursor keys
to select
a setting (lowercase, capital letters, digits and space).
•
Press many times the
arrow up cursor key
to scroll letters or digits increasingly
(from A to Z or from 0 to 9).
•
Press many times the
arrow down cursor key
to scroll letters or digits
decreasingly (from Z to A or from 9 to 0).
•
Press the
right
and
left cursor keys
to scroll the cursor along letters or digits or
to set a space, after positioning the cursor on the last character (letter or digit) of
the message.
•
Press
MENU
and at the same time
the arrow up
or
down cursor keys
(many
times) to select the space setting that erases the selected character.
•
Press
ENTER
to toggle between fields or to go to the following selection.
3.5 -
How to use the remote control
The Infrared remote control (
39
) enables the operator to conduct the main tests
without using the buttons of the STARGAS.
To correctly use the remote control, point it towards the front of the STARGAS from a
distance of not more than
10 meters
.
If the remote control effectiveness diminishes remarkably with reference to the
distance, it is necessary to replace the cells, located in the special housing.
NOTA BENE:
To favour the correct operation of the remote control inside the vehicle, for some types
of cars using shielded windows it is necessary to slightly lower the window on the
aiming side.
3.6 -
Use of the memory card
The memory card has to be introduced and removed from the reading slot (
2
) of the
STARGAS when the tool is off or in the stand-by mode.
Summary of Contents for STARGAS 898 LIGHT
Page 3: ...47 48 49 50 51 52...
Page 4: ...Via Provinciale 12 43038 Sala Baganza PARMA ITALY Tel 0521 837311...
Page 6: ......
