![background image](http://html1.mh-extra.com/html/tecnotest/stargas-898-light/stargas-898-light_operating-instructions-manual_1072209033.webp)
______________________________________________________________________________ STARGAS
OPERATING INSTRUCTIONS
29
1.0 -
DESCRIPTION OF STARGAS
1.1 -
Tool front view
1. Lens
: Infrared rays conveying filter for the remote control receiver.
2. Memory card slot
: To update and install new programs for the direct use of the
Autodiagnosis and for future functions.
3. STAND-BY key
:
Slightly press the key to turn off the LCD display back-light
(sleep mode).
Press again to go back to the previously displayed function.
Hold down the key for more than 2 seconds to put the tool in the stand-by
mode.
Press the key again to reset and to take the tool back to the stand-by position
ready for the use. The function is indicated by the red colour of the key.
4. ESC key
: To quit the various pages of the test measurement, enabling and
setting.
5. MENU key
: To enable or disable the FUNCTIONS BAR display, or to scroll the
display of many FUNCTIONS BAR in a decreasing way (from the last to the first).
6. Cursor shift keys
: Allow to shift selection to the four directions (low, up, right
and left).
7. ENTER key
: To confirm key.
8. Contrast key
: To decrease the contrast the LCD.
9. Contrast key
: To increase the contrast the LCD.
10. FEED key
: To feed the printer paper.
11. Printer
: It prints the test results on a ticket.
12. F1, F2, F3, F4 and F5 keys
: Press the keys when prompted on the display or to
enable the FUNCTIONS BAR icons.
13. Display LCD
: Enables the operator to follow the test phases and to read
immediately the results.
Summary of Contents for STARGAS 898 LIGHT
Page 3: ...47 48 49 50 51 52...
Page 4: ...Via Provinciale 12 43038 Sala Baganza PARMA ITALY Tel 0521 837311...
Page 6: ......