STARGAS _______________________________________________________________________________
32
OPERATING INSTRUCTIONS
3.0 -
USE OF THE STARGAS
Error messages are displayed on the tool LCD simultaneously to the emission of a
sound warning.
3.1 -
Test Conditions
Once the connections have been performed, before starting the test check:
•
The ambient temperature ranges between
+5
°C
and
+40
°C
(degrees
Centigrades).
•
The exhaust pipe of the vehicle is tight. This condition has to be checked by
hermetically occluding the exhaust pipe while the engine is idling; in such a
condition no gas leakages from the pipe joints should be detected.
•
The following car parameters are correct, as per the manufacturer’s indications.
IDLING
DWELL ANGLE (DWELL)
IGNITION ANGLE (ADVANCE)
PLAY OF THE VALVES
•
Engine temperature conditions comply with the manufacturer’s specifications.
•
The cold starting devices (automatic and manual) are disconnected.
3.2 -
Temperature measurement
The temperature probe (
45
) (option) has to be introduced at the place of the oil
dipstick.
In order to introduce it deeply enough, adjust the rubber plug by using as a reference
the original dipstick length.
ATTENTION:
When introducing the temperature probe, do not bring the connecting cable
near sources of strong interferences (coil, spark plug cables, distributor)
.
Moreover do not twist the cables inside the engine compartment
.
Summary of Contents for STARGAS 898 LIGHT
Page 3: ...47 48 49 50 51 52...
Page 4: ...Via Provinciale 12 43038 Sala Baganza PARMA ITALY Tel 0521 837311...
Page 6: ......
