TRAIL-Control
79
990267EN ind. A
5.
- Confirm within 3 seconds.
⇨
Calibration is initiated.
⇨
The following message appears:
"Middle position: the calibration runs"
⇨
Phase 1 is completed when the message 'Middle position: the calibration runs" is no longer
displayed.
⇨
You have calibrated the middle position.
6.
You can start phase 2 of the calibration.
Phase 2 Teach-in end stops
1. CAUTION! Do not calibrate the end stops in the maximum folded-out position, but shortly
before it. Although this will restrict the turning circle, it ensures that the TRAIL-Control
cylinders will not get damaged.
2.
- Steer the trailer device almost fully to the left.
3.
- Start calibration.
⇨
The following message appears:
"Most left position: the calibration is ready"
4.
- Confirm within 3 seconds.
⇨
Calibration is initiated.
⇨
The following message appears:
"Most left position: the calibration runs"
5.
Wait until the message "Most left position: the calibration runs" is no longer displayed.
6.
- Steer the trailer device almost fully to the right.
7.
- Start calibration.
⇨
The following message appears:
"Most right position: the calibration is ready"
8.
- Confirm within 3 seconds.
⇨
Calibration is initiated.
⇨
The following message appears:
"Most right position: the calibration runs"
9.
Wait until the message "Most right position: the calibration runs" is no longer displayed.
⇨
Phase 2 of calibration has been completed.
