DISTANCE-Control
74
990267EN ind. A
When turning, the boom may lose its equilibrium and be sloped by centrifugal force. This may cause
damage to the plants.
So that the boom does not touch plants or the ground when turning in headland, the boom will be
raised as soon as application is suspended. The clearance height determines how high it will be
raised.
You can configure the clearance height in the following situations:
▪
When the field sprayer is at rest – before work.
▪
When the field sprayer is moving – during work.
Configuring clearance height when field sprayer is at rest
When the field sprayer is at rest, you adjust the clearance height as follows:
DISTANCE-Control is deactivated.
All USonic sensors are above the plants.
Field sprayer is not spreading.
1.
Set boom to desired clearance height.
2.
Switch to the "DISTANCE-Control" screen:
3.
- Save clearance height.
⇨
The clearance height will be saved.
Adjusting clearance height while working
Use the following function keys to operate the function:
Function icon
Function
Lift boom
Lower boom
You adjust the clearance height while working as follows:
DISTANCE-Control is active.
The field sprayer is in the field. The boom is located over the plants.
Field sprayer is not spreading.
1.
Switch to the "DISTANCE-Control" screen:
Purpose
Procedure
Controls
Procedure
