Operating job computer sprayer on the
field
63
990267EN ind. A
⇨
The following appears on the work screen:
⇨
In the "Sections" screen the section with the wide area nozzles will be activated.
Using wide area nozzles with SECTION-Control
When wide area nozzles are active, they will be switched by the SECTION-Control like sections. This
means that when there are overlaps the wide area nozzle section will be switched off.
When wide area nozzles are deactivated, before starting a new navigation with SECTION-Control,
you need to adjust the parameter "Tramline width" in SECTION-Control.
Switching foam marker on and off
When the field sprayer is fitted with foam markers, you can use the function in this way.
Depending on the configuration, there are two ways to use the foam marker:
▪
Configuration A: Two foam markers can be activated at the same time.
▪
Configuration B: Only one foam marker can be switched on.
Use the following function keys to operate the function:
Function icon
Function with configuration A Function with configuration B
Switch on left foam marker.
Switch on left foam marker. The
right foam marker will be
switched off.
Switch on right foam marker.
Switch on right foam marker.
The left foam marker will be
switched off.
On the following diagram you see how this function is shown on the work screen:
Foam markers on both sides of the boom activated
Dealing with weed infestations
"Localized mode" is designed for the targeted treatment of small weed infestations.
In contrast to normal mode, in localized mode you can switch individual sections on and off, even
when they are not adjacent to one another.
Work screen in localized mode
The work screen in localized mode differs slightly from the normal work screen.
In the boom terminal a cursor bar appears below the boom:
7.2.6
Controls
Illustration
7.2.7
