Preparing job computer sprayer for use
32
990267EN ind. A
▪
If, during movement at constant speed, the current spread volume jumps around the target
value, you need to reduce the regul. factor.
▪
If, when speed is changing, the spread volume does not adjust to the rate quickly enough, you
need to increase the regul. factor.
Setting limit values for the spray pressure
This includes the following parameters:
▪
Max. pressure
▪
Min. pressure
This setting defines a spray pressure range within which the spray pressure is optimal.
If the spray pressure is above or below the maximum limit values, an alarm will be triggered.
You can decide what limit values you want for yourself.
If no pressure sensor is installed on your sprayer, you must deactivate this function as follows:
▪
Enter value 0 in the min. pressure line.
▪
Enter value 0 in the max. pressure line.
Minimum speed
Minimum work speed
If the field sprayer falls below the minimum work speed, the following happens:
▪
Spreading will be switched off automatically.
▪
The work screen displays the icon:
Min Auto speed
Minimum auto speed
If the field sprayer falls below the minimum automatic speed, the following happens:
▪
The spray pressure control will be switched off automatically.
▪
Manual mode will be activated.
▪
The work screen displays the icon:
When the value is set to 0, this function is deactivated.
This parameter must be higher or the same as the parameter "Minimum speed".
Max. wind speed
Maximum wind speed
Wind sensor must be installed.
If the maximum wind speed is exceeded, an alarm will be triggered.
Tank size
Size of the tank for the spray liquid.
