Convection gas oven rev. 0___________________________________ MODD. EKF 1111G E UD – EKF 1064G E UD
_________________________________________________________________________________________ page. 19
Press the key again to cancel the programmed switch on.
Cooking in “manual” mode
After switching on the oven (in “ON” / green LED off) set the value of each parameter required
for cooking.
Set the cooking time (visible on the time display) with knob “1”:
-
“inF” (steps excluded / step LED off)
-
from one minute to 4 hours per step (“inF” excluded / step LED on)
Set the cooking temperature (visible on the temperature display) for one or more steps, with knob “2”:
-
cooking chamber from 50°C to 270°C (LED on
)
-
core probe (optional parameter) from 0°C to 100°C (key
/LED on
)
-
∆
T / DELTA-T (optional parameter) from 0°C to 100°C (key
/ (LED on “
∆
T”)
Set the amount of humidity/steam (optional parameter) for one or more steps, with knob “3” (blue LEDs on from
10 to 100%)
Set the “preheating” function (optional parameter) pressing the key
.
Set the “motors at
½
speed”function (optional parameter) for one or more steps pressing the
key
. Start the cooking cycle by pressing the key
.
Please note
If the cooking cycle is not controlled by the core probe and has been divided into one or more timed steps, the
oven automatically switches off when the time set in the individual step or overall in the various steps has elapsed.
If an “inF” (“infinite”) cooking time has been set the oven continues working until the operator switches it off by
pressing the key
.
If the cooking cycle is controlled by the core probe and has been divided into one or more steps (even timed),
when the temperature set with the probe is reached it moves to the next step; if on the other hand one step only
has been opted for (even timed), or an “inF” time, the cycle ends and the oven switches off automatically,
regardless of the time set for the step.
Cooking in “programmed” mode
If cooking programs have already been stored - the program number matches a specific cooking
cycle for a specific food - using them is easy.
After switching on the oven (“ON”/green LED off) select the number of the stored program
(visible on the program display) using the key
or
.
Start the cooking cycle by pressing the key
.
At the end of the cooking cycle the oven switches off automatically and a “beep” goes off for
10”.
Please note
Before starting the cooking cycle it is possible to check the value of the parameters set on the four
steps (press the key
) and modify them if necessary. For the modified parameters to become
operative they must be stored (press the key
until the confirming “beep”).
When the cooking cycle has started it is no longer possible to modify the value of stored parameters.
