Convection gas oven rev. 0___________________________________ MODD. EKF 1111G E UD – EKF 1064G E UD
_________________________________________________________________________________________ page. 15
5 Switching on
The control panel is automatically activated as soon as the oven is electrically powered.
The time display shows the current time.
Press the key
to activate the time display (digits
“0000”), the temperature display (digits “000”) and the blue LED bar (white LED on). The oven
is ready for setting cooking parameters
6 Operative mode
Programming the cooking time
To set the cooking time (from 1 minute to 4 hours) use knob “1”. Any set value is visible on
the time display.
Programming cooking temperature
To set the cooking temperature (from 50°C to 270°C in cooking chamber and from 0°C to
100°C for “
∆
T” and for the “core” probe) use knob “2”. Any set value is visible on the
temperature display.
Programming cooking humidity/steam
To set the amount of humidity/steam use knob “3”. The set value is visible on the light bar
formed by 10 blue LEDs (from 10 to 100%). The white LED indicates that the humidity/steam
function is disabled (convection operation) .
Warning
The white led blinks whenever the burner of the oven is active.
Selection of cooking step
To select the cooking step (from 1 to 4) press the key
. The green LED comes on to indicate
the selected step.
The desired cooking parameters may be set for each selected step (times / temperatures
/ humidity / steam).
Press the key and the time of each cooking step may be checked at any moment.
During oven operation (on the time display) it is possible to view the residual cooking time of all
4 steps (the flashing LED indicates the operative step at that moment).
An “infinite” time may be set in the first and fourth step (turn knob “1” anti-clockwise): the
time display reads “inF” (first step) or “HoLd” (fourth step: useful to keep food warm at the end
of cooking). In these cases the other steps can no longer be selected.
Selecting cooking temperature
To select cooking temperature (in cooking chamber/“core” probe/”
∆
T”) press the key
.
The green LED comes on to indicate the selected temperature.
The values of selected temperatures are visible on the temperature display.
Temperature in cooking chamber
When the oven is switched “ON” the temperature is automatically selected in cooking chamber
(LED on
) .
To set the desired value use the knob “2”. During oven operation the display reads alternatively
the set temperature (led on
) and the actual temperature in cooking chamber (led on
).