TECNOEKA EKF 1064G E UD, Original Operating And Instruction Manual, Page: 18 / 28

TECNOEKA Srl _____________________________________________________________ use and instruction manual
page. 18 __________________________________________________________________________________________
“Cooking chamber cooling” key
To quickly cool the oven chamber after ending a cooking cycle, hold the door open and press
the key .
Activation of the function is confirmed by the green LED coming on. During forced ventilation,
the temperature display shows the temperature value in the cooking chamber moment by
moment.
Warning
During open door operation do not remove the fan cover; do not touch the moving fans and
resistors which are still hot.
“Clock +1” key
At the end of the cooking cycle a “beep” goes off for 10 seconds and the time display starts
flashing the digits “0000”.
During the flashing (active for 60 seconds) press the key . to lengthen cooking time: each
pressure of the key increases the time by one minute (option disabled at the end of a cooking
cycle with core probe).
With the oven “OFF” the time display shows the current time: to modify it or insert it ( if
missing) use the key .
Insert or modify the current time
With the oven ”OFF”, press the key and the two hour digits start flashing on the time
display.
Insert the current hour with knob “1”
The day of the week is visible on the temperature display (from 1=Monday to 7=Sunday). Insert
the current day with knob “2”
Press the key and the two minute digits start flashing on the time display. Insert the current
minutes with knob “1”
Pressing the key on the time display brings up the entire time.
“START clock” key
With the oven “ON” or during the cooking cycle, press the key to check the current time
on the time display at any time (the other displays are disabled).
Programmed switching on
With the oven ”OFF” press the key to view the parameters already inserted for
programmed switching on: the time (time display), the day (temperature display) and the
number of the cooking program (program display).
To modify them press the key .
The time display starts flashing the two hour digits: insert the desired switch on hour with the
knob “1”.
The temperature display starts flashing the day digit: insert the desired day with the knob “2”
(from 1=Monday to 7=Sunday).
The program display starts flashing the two program number digits: insert the desired cooking
program number with the scrolling buttons.
Press the key again and the time display starts flashing the two minute digits: insert the
desired minutes with knob “1”.
Press the key and the time display shows the current time. Press the key : the green
LED starts flashing to confirm that the oven is ready (stand-by) for programmed switch on.