Technosoft iPOS4808 BX-CAN, Technical Reference

Page: 103 / 107


Technosoft 2015 101 iPOS4808 BX-CAN Technical Reference
Analogue_Input_Range – is the range of the drive analogue input for feedback, expressed in [V].
You can read this value in the “Drive Info” dialogue, which can be opened from the “Drive Setup”
Tacho_gain – is the tachometer gain expressed in [V/rad/s]
6.12.4. DC brushed motor with tacho on motor
The internal motor speed units are A/D converter bits. The correspondence with the motor speed
in SI units is:
] IU [ Speed _ Motor
gain _ Tacho
Range _ Input _ ue log Ana
] SI [ Speed _ Motor
×
×
=
4096
where:
Analogue_Input_Range – is the range of the drive analogue input for feedback, expressed in [V].
You can read this value in the “Drive Info” dialogue, which can be opened from the “Drive Setup”
Tacho_gain – is the tachometer gain expressed in [V/rad/s]
6.12.5. Step motor open-loop control. No feedback device or incremental
encoder on load
The internal motor speed units are motor µsteps / (slow loop sampling period). The
correspondence with the motor
speed in SI units is:
] IU [ Speed _ Motor
T steps _ No steps _ No
] SI [ Speed _ Motor
×
× × µ
π ×
=
2
where:
No_steps – is the number of motor steps per revolution
No_µsteps – is the number of microsteps per step. You can read/change this value in the “Drive
Setup” dialogue from EasySetUp.
T – is the slow loop sampling period expressed in [s]. You can read this value in the “Advanced”
dialogue, which can be opened from the “Drive Setup”
6.12.6. Step motor closed-loop control. Incremental encoder on motor
The internal motor speed units are motor encoder counts / (slow loop sampling period). The
correspondence with the load speed in SI units is:
] IU [ Speed _ Motor
T lines _ encoder _ No
] SI [ Speed _ Motor
×
× ×
π ×
=
4
2
where:
No_encoder_lines – is the motor encoder number of lines per revolution
T – is the slow loop sampling period expressed in [s]. You can read this value in the “Advanced”
dialogue, which can be opened from the “Drive Setup”.