Technosoft iPOS4808 BX-CAN, Technical Reference

Page: 95 / 107


Technosoft 2015 93 iPOS4808 BX-CAN Technical Reference
] IU [ on Accelerati _ Motor
T Tr lines _ encoder _ No
] SI [ on Accelerati _ Load
×
× × ×
π ×
=
2
4
2
where:
No_encoder_lines – is the motor encoder number of lines per revolution
Tr – transmission ratio between the motor displacement in SI units and load displacement in SI
units
T – is the slow loop sampling period expressed in [s]. You can read this value in the “Advanced”
dialogue, which can be opened from the “Drive Setup”
6.3.7. Brushless motor with sine/cosine encoder on motor
The internal acceleration units are interpolated encoder counts / (slow loop sampling period)
2
. The
correspondence with the load acceleration in SI units
1
is:
For rotary motors:
] IU [ on Accelerati _ Motor
T Tr ion Interpolat periods _ Enc
] SI [ on Accelerati _ Load
×
× × × ×
π ×
=
2
4
2
For linear motors:
] IU [ on Accelerati _ Motor
T Tr ion Interpolat
accuracy _ Encoder
] SI [ on Accelerati _ Load
×
× ×
=
2
where:
Enc_periods – is the rotary encoder number of sine/cosine periods or lines per revolution
Encoder_accuracy – is the linear encoder accuracy in [m] for one sine/cosine period
Interpolation – is the interpolation level inside an encoder period. Its a number power of 2
between 1 an 256. 1 means no interpolation
Tr – transmission ratio between the motor displacement in SI units and load displacement
in SI units
T – is the slow loop sampling period expressed in [s]. You can read this value in the
“Advanced” dialogue, which can be opened from the “Drive Setup”
1
SI units for acceleration are [rad/s
2
] for a rotary movement, [m/s
2
] for a linear movement