Technosoft IO iPOS4808, Technical Reference

Page: 23 / 44

© Technosoft 2013 11 IO-iPOS4808 Technical Reference
3.2.5. J8
–
Power supply and motor connector
Pin Pin name Type Function
1 GND - Ground for logic supply
2 +V
LOG
I Logic supply: +9 to +36V
DC
3 +V
MOT
I
Positive terminal of the motor V
MOT
: +11 to
+50V
DC
4 GND - Ground for motor supply
5 A O
Phase A for 3-phase motors
Phase A+ for 2-phase steppers
Motor+ for DC brushed motors
6 B O
Phase B for 3-phase motors
Phase A- for 2-phase steppers
Motor- for DC brushed motors
7 C O
Phase C for 3-phase motors
Phase B+ for 2-phase steppers
8 D O
External brake resistor
Phase B- for 2-phase steppers
3.2.6. J9
–
Analog inputs connector
Pin Pin name Type Function
1 GND - Ground
2 R05 I External reference signal (mono-polar 0 to +5V )
3 R10 I External reference signal (bipolar -10V to +10V )
4 +5V O +5V
OUT
output supply (generated by iPOS4808 drive)
5 IN7 I General-purpose digital input IN7
6 F10 I External feedback signal (bipolar -10V to +10V)
7 F05 I External feedback signal (mono-polar 0 to +5V)
8 GND - Ground