Technosoft IO iPOS4808, Technical Reference

Page: 27 / 44

© Technosoft 2013 15 IO-iPOS4808 Technical Reference
AxisID0
2-3
Connect a pull-up/pull-down 4.7K
Ω resistor
(depending on jumper 3) to AxisID0
OFF
Connect a pull-up/pull-
down 22K Ω resistor
(depending on jumper 3) to AxisID0
5 Ref. 5/10
1-2
Select 0…+5 V Reference
2-3 Select -
10…+10 V Reference
6 Ref. Int/Ext
1-2 Select Internal Reference
2-3 Select External Reference
7 Sine+
ON Sin+ is 1Vpp and goes from J11 to iPOS4808
OFF reserved
8 Sine-
ON Sin- is 1Vpp and goes from J11 to iPOS4808
OFF reserved
9 AxisID1_MSB
1-2 Connect AxisID1 input to +5V
DC
2-3 Connect AxisID1 to GND
OFF Leave input unconnected
10 AxisID1_LSB
1-2
Don’t connect a pull
-up/pull-down resistor to
AxisID1
2-3
Connect a pull-up/pull-down 4.7
K Ω resistor
(depending on jumper 9) to AxisID1
OFF
Connect a pull-up/pull-
down 22K Ω resistor
(depending on jumper 9) to AxisID1
11
ON
Cos+ is 1Vpp and goes from J11 to
iPOS4808
OFF reserved
12 Cosine-
ON Cos- is 1Vpp and goes from J11 to iPOS4808
OFF reserved
13 AxisID2_MSB
1-2 Connect AxisID2 to +5V
DC
2-3 Connect AxisID2 to GND
OFF Leave input unconnected
14 AxisID2_LSB
1-2
Don’t connect a pull
-up/pull-down resistor to
AxisID2
2-3
Connect a pull-up/pull-down 4.7
K Ω resistor
(depending on jumper 13) to AxisID2