Technomark GraphiX User Manual Download Page 12

Page: 12 / 72

Page 12 sur 72

www.technomark-marking.com

TECHNOMARK

1 Allée du développement
42350 LA TALAUDIÈRE (France)
Tel : +33 (0) 4 77 22 25 91
Fax : + 33 (0) 4 77 22 38 93
E-mail : [email protected]

User Guide GRAPHIX_v1.4_UK

TRAÇABILITÉ CRÉATIVE

CREATIVE TRACEABILITY

4.3.5.2.

Door safety switch

Everyone should know the location of safety equipment and how it works.

4.3.5.3.

Enclosures

The particular use of enclosures on the machine contributes to it being a class 1 laser.

Never remove panels

4.3.5.4.

Isolating switches

The machine has a main electrical isolator that cuts the power to the machine as a whole. An indicator lamp shows
that the machine is receiving power.

Never remove protective guards.

Never bypass damage, remove or re-position protective guards without Technomark's consent.

Do not alter the door safety switch settings.

Before using the machine, check that guards are operating correctly.

Summary of Contents for GraphiX









































































Search results

Summary of Contents for GraphiX

Reviews:

Related manuals for GraphiX

Brands by name

Popular brands

Technomark GraphiX, User Manual

Search results

Summary of Contents for GraphiX

Reviews:

Related manuals for GraphiX

Brands by name

Popular brands