Page 56 sur 72
www.technomark-marking.com
TECHNOMARK
1 Allée du développement
42350 LA TALAUDIÈRE (France)
Tel : +33 (0) 4 77 22 25 91
Fax : + 33 (0) 4 77 22 38 93
E-mail : [email protected]
User Guide GRAPHIX_v1.4_UK
TRAÇABILITÉ CRÉATIVE
CREATIVE TRACEABILITY
10.4.
Projecting and marking your file
10.4.1.
Flat file
When the door is open, the indicator on the marking head is on and a steady orange.
Before projecting the file, it is essential that the focussing distance is set to obtain a realistic projection.
(See
6.Identification of the components
paragraph)
Remove the protective cap from the lens.
1)
Position the part to be marked inside the machine.
2)
Manually triggered electric column option
Using the "Z axis" selector, move the marking head so as to direct the two beams at a single point (with an F160 lens).
3)
Option with electric column controlled by the marking file
o
Press the "Show laser engine" button on the "laser" tool bar or double click the "GraphPro – Laser
Engine" shortcut on the desktop to open the Laser Engine application.
o
In the "
current position"
field on the "Z axis" tab enter the thickness of the part to be marked.
