Technomark GraphiX User Manual Download Page 34

Page: 34 / 72

Page 34 sur 72

www.technomark-marking.com

TECHNOMARK

1 Allée du développement
42350 LA TALAUDIÈRE (France)
Tel : +33 (0) 4 77 22 25 91
Fax : + 33 (0) 4 77 22 38 93
E-mail : [email protected]

User Guide GRAPHIX_v1.4_UK

TRAÇABILITÉ CRÉATIVE

CREATIVE TRACEABILITY

Bar opening (accessory)

This accessory allows a part to be marked along its edge.

Do not look into the machine during marking. We recommend the wearing of protective glasses, if the distance

between the part and the PVC brush is too great.

PC/Laser source

The GraphiX marking system uses an optical fibre laser source. It guarantees a high degree of stability, low sensitivity
to the optical offset and a longer product life.

The GraphiX system includes a computer with Windows 7 embedded. The PC is equipped with the GraphPro marking
software.

Identification plate

Door safety switch

The (two-channel) safety switch closes a shutter at the exit from the laser source and blocks emission of the source,
as soon as the door is opened.

Connection panel

This panel comprises:

•

The main switch

•

VGA connector

•

USB port

•

Extraction connector

Summary of Contents for GraphiX









































































Search results

Summary of Contents for GraphiX

Reviews:

Related manuals for GraphiX

Brands by name

Popular brands

Technomark GraphiX, User Manual

Search results

Summary of Contents for GraphiX

Reviews:

Related manuals for GraphiX

Brands by name

Popular brands