Technogym ISOCONTROL, Service Maintenance Manual

Page: 44 / 72

ISOCONTROL: Service & Maintenance Manual - rev. 1.2
Pagina 6.28
6.1. TEST PROCEDURE
6.1.1. LED T
EST
To carry out the test:
1. Access the service menu as described in paragraph 9.1. “Service menu configuration”.
2. Wait for the menu to reach the “LED Test” function of paragraph 9.1.7.
3. Perform the check as instructed in the above-mentioned paragraph.
If the outcome of the test is not as expected, replace the display board.
6.1.2. E
NCODER TEST
To carry out the test:
1. Access the service menu as described in paragraph 9.1. “Service menu configuration”.
2. Wait for the menu to reach the “Encoder test” function of paragraph 9.1.8.
3. Perform the test as instructed in the above-mentioned paragraph.
If the outcome of the test is not as expected, carry out the troubleshooting procedure described in
paragraph 6.3. “The ROM is not read or is read incorrectly”.