Technogym ISOCONTROL, Service Maintenance Manual

Page: 61 / 72

ISOCONTROL: Service & Maintenance Manual - rev. 1.2
Pagina 9.1
9. MACHINE CONFIGURATION
9.1. SERVICE MENU CONFIGURATION
The configuration procedure is invoked, when the device is in standby mode, by:
1. Simultaneously pressing the “+” and “-” keys for a few seconds.
2. Enter the password “
2501 ” which protects against unauthorized access. Use the “+” e “-” keys
to bring up the first digit on the display, then wait for the cursor to advance to the next digit.
Continue in the same way for all the digits of the password.
3. The various functions of the service menu will then sequentially appear on the display.
9.1.1. M
ACHINE CODE
This function selects the machine on which the Isocontrol is installed. The display scrolls the
MACHINE CODE message followed by:
MC:182
The available options are listed in the table below:
MACHINE
Selection Element
MACHINE
Selection Element
ABDOMINA
L CRUNCH
182 229 289 LOW ROW 193 234 294
ABDUCTOR 179 226 286
LOWER
BACK
181 228 288
ADDUCTOR 180 227 287 MULTI HIP 186 / /
ARM CURL 183 230 290 PECTORAL 188 233 293
ARM
EXTENSION
184 231 291 PULL DOWN 191 / /
CHEST
INCLINE
190 / / PULLEY 195 / /
CHEST
PRESS
171 220 281
ROTARY
CALF
175 / /
DELTS 192 / /
ROTARY
TORSO
189 / /
GLUTE 185 232 292
SHOULDER
PRESS
170 219 280
LAT
MACHINE
176 245 295
TOTAL
ABDOMINAL
216 / /
LEG CURL 174 223 284 UPPER BACK 177 / /
LEG
EXTENSION
172 221 282
VERTICAL
TRACTION
178 225 285
LEG PRESS 173 222 283
Use the “+” and “-” keys to bring up the number of the desired machine on the display. After
configuring the machine, wait 5 seconds for the system to automatically advance to the next function.