Technogym ISOCONTROL, Service Maintenance Manual

Page: 65 / 72

ISOCONTROL: Service & Maintenance Manual - rev. 1.2
Pagina 9.2
Use the “+” and “-” keys to bring up the desired value on the display. After reaching the desired
value, wait 5 seconds for the system to automatically advance to the next function.
To save the changes made see paragraph 9.1.9. “Saving the configuration”, to exit without saving
any changes disconnect the power supply form the machine.
9.1.6. E
NABLING
TGS
MESSAGES
This function is used for disabling messages relating to the TGS key, for installations in gyms that
do not use the Wellness System.
On the display, the TGS REQUEST message is followed by:
TR:1
The options are:
•
1 to enable
•
0 to disable
Use the “+” and “-” keys to bring up the desired value on the display. After reaching the desired
value, wait 5 seconds for the system to automatically advance to the next function.
To save the changes made see paragraph 9.1.9. “Saving the configuration”, to exit without saving
any changes disconnect the power supply form the machine.
9.1.7. LED T
EST
This function is used for checking the operation of all the LEDs on the display.
There is no message displayed concerning the outcome of this test, which the user must ascertain
visually.
Wait 5 seconds for the system to automatically advance to the next function.
9.1.8. E
NCODER TEST
This function is used for checking that the encoder correctly detects the pulley movement. To carry
out the test:
9.1.8.1 Machines with 1 encoder board (all Element machines, for Selection machines refer
to paragraph 5.2.2.2 “Pulleys to replace on Selection machines”.)
1. Perform a single repetition and check that the displacement of the weight stack in millimeters is
correctly shown on the display.
The displayed value should increase when the weight stack is lifted and, conversely,
decrease when the weight stack is lowered.
2. Check that the displayed value returns to 0 when the weight stack is returned to the rest
position.
3. Repeat the operations of steps 1 and 2, varying the weight and speed of execution of the
exercise.