manualshive.com logo in svg

TechnipFMC Smith Meter MPU 1600c, Installation, Operation & Maintenance Manual

Share
Download
TechnipFMC Smith Meter MPU 1600c Installation, Operation & Maintenance Manual Download Page 87

Issue/Rev. 0.1 (11/18) ║ MNKS025 • Page 87

 

7.3.2. 

Display Maintenance Settings

  

Allows for the unit to be reset to factory defaults by clearing all new settings.

 

  

  
 

7.3.2.1.  Touch Screen Calibration

  

Opens  a  touch  position  calibration  screen.  This  will  calibrate  the  screen  input  by 

 

 

 

displaying a series of touch screen targets and matching the input values with the known 

 

 

 

location of the targets. 

 
 

7.3.2.2.  Password Reset

  

This option allows resetting all passwords to factory defaults. The procedure described 

 

 

 

below  must  be  followed  to  successfully  accomplish  this  task.  Please  note  that  if 

 

 

 

successful, the electronic seal will be broken and the action logged; if the unit is under 

 

 

 

Weights and Measures control, it will need inspected and sealed again.

 

 

1.    Order a USB adapter cable from TechnipFMC; this cable connects to CN3 and 

 

 

 

 

presents a standard type A USB connector.

 

 

2.    Prepare a USB flash drive by creating an empty file named “password-reset.txt” on 

 

 

 

 

the root directory (folder).

 

 

3.    Ensure the area contains no flammable gases and break the physical seal on the 

 

 

 

 

display enclosure. Open the housing and plug the adapter cable into CN3. Plug the 

 

 

 

 

USB flash drive into the other end of the cable.

 

 

4.    Select the password reset on the Maintenance Menu and follow the instructions.

 

 

5.    Once the passwords have been reset, remove the flash drive and cable.

 

7.3.3. 

Display Information

  

The information screen displays key data about the integrated Display.

  

  

• 

Software Version 

– Software version running on the display

• 

Browser Signature

 – Checksum value to be noted after the unit has been sealed

• 

Parameter Seal

 – Indicates if the display has been sealed; A lock icon for sealed 

 

 

and an unlock icon for unsealed    

• 

Welmec Log

 – A log of all changes to parameters than could be relevant to a Weights 

 

 

and Measures official  

  

 

MPU Series C I/O/M Manual 

 

 

 

 

 

 

Integrated Touch Screen Display

Summary of Contents for Smith Meter MPU 1600c

























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands