TechnipFMC Smith Meter MPU 1600c Installation, Operation & Maintenance Manual Download Page 77

Page: 77 / 120

Issue/Rev. 0.1 (11/18) ║ MNKS025 • Page 77

6.7.7.

Update Software

(Path: Diagnostics > Update Software)

This feature is used to update the software within a meter.

This process will reboot the meter upon completion. During the reboot period, the meter

will be without measurement functionality.

As a precautionary measure, it is recommended that the current database be backed-

up prior to updating the software. This is also done inside the 'Diagnostics' menu. In

order to generate a back-up of the current database, please follow the instructions in

paragraph 5.6.5

(1) Locate the software package to be installed. The file should be in the following

format: usm_X.upkg
(2) Click the 'Update Software' button. The following message will appear.

Click anywhere on the screen to remove the warning.

The following process will reboot the unit upon completion.

(3) Logon utilizing the proper credentials for 'Security Level 5'
(4) Select 'Browse
(5) Locate the proper software revision package

(6)   Select the file in the format of 'usm_X.upkg' and select 'Open'
(7)   Once the proper file has been selected, click 'Upload File'
(8)   Waiting approximately 20 minutes is a safe way to ensure that the software

revision has completely installed
(9) After the 20 minutes has passed, re-type the IP Address into the web browser

to refresh the meter.

(10) Verify that the meter is properly functioning:

• Verify that the Date and Time is updating and set properly

• Verify that there are no active alarms
(11) The meter will now be updated to the new software

MPU Series C I/O/M Manual

Web User Interface

Summary of Contents for Smith Meter MPU 1600c

























































































































Search results

Summary of Contents for Smith Meter MPU 1600c

Reviews:

Related manuals for Smith Meter MPU 1600c

Brands by name

Popular brands

TechnipFMC Smith Meter MPU 1600c, Installation, Operation & Maintenance Manual

Search results

Summary of Contents for Smith Meter MPU 1600c

Reviews:

Related manuals for Smith Meter MPU 1600c

Brands by name

Popular brands