46
SAS UG 202205-01
Operation Guide
OPERATING THE SAFETY ARM SYSTEM (CONTINUED)
RAISING THE SAFETY ARM
1.
Pull and hold the fixed safety pin (red round han
-
dle) until it reaches the final position.
2.
While holding the safety pin, pull the safety arm
up.
3.
Bring the safety arm all the way up into vertical
position and make sure the triangle head is cor
-
rectly seated into the clamp block.
4.
Release the safety pin to lock the Safety Arm in
its vertical position for transport.
WARNING
9
Always use the system with the lock pin (pin with finger ring) in the system.
9
Always hold the arm securely when you manipulate it.
9
Always pull and hold the safety pin (red handle) until it reaches the final upper position (locked) or down (un-
locked). Failure to pull the safety pin (red handle) when repositioning the arm may cause damage to the Arm or
locking mechanism.
