SAS UG 202205-01
47
Operation Guide
OPERATING THE SAFETY ARM SYSTEM (CONTINUED)
REMOVING THE SAFETY ARM
1.
Put the Safety Arm in vertical position.
2.
Remove the medical device from the Standard
Surface Base on the Safety Arm System.
WARNING
Ensure that the medical device has been removed
from the Standard Surface Base prior to removing
the Safety Arm from the clamp block. Failure to do
so, can cause injury to the patient or operator and
damage to the equipment and medical device.
3.
Remove the fixed lock pin by pulling outwards.
4.
Pull and hold the Safety Pin (red round handle).
