TECHNIMOUNT SAFETY ARM SYSTEM 500 User Manual Download Page 49

Page: 49 / 62

www.technimount.com

SAS UG 202205-01

Return To Table of Contents

Safety Arm System Options

STRYKER POWER-PRO OPTIONS

Some exceptions may apply for the Power-PRO stretcher. Please confirm with Customer Service at

customerservice@

technimount.com

prior to placing your order

DESCRIPTION

OPTION PART NUMBER

Tubular Arm with Triangular Base – Patient Right Installation Yellow-Powder-

Coated Finish

400-20-UN

Tubular Arm with Triangular Base – Patient Left Installation Yellow-Powder-Coated

Finish

400-20-UN-LFS

Angled Arm with Triangular Base – Patient Right Installation Yellow-Powder-

Coated Finish

400-20-UN-ANG

Angled Arm with Triangular Base – Patient Left Installation Yellow-Powder-Coated

Finish

400-20-UN-LFS-ANG

Clamp Block – Stryker Cot/Stretcher - Patient Left Installation

500-10-PFXT-LFS

IV Pro Adapter – IV Pole Support – Patient Left Installation - Without Knee Gatch

511-00-UN-LFS - WHKG

IV Pro Adapter – IV Pole Support – Patient Left Installation - With Knee Gatch

511-00-UN-LFS - KG

IV Pro Adapter – IV Pole Support – Patient Right Installation - Without Knee Gatch

511-00-UN-RHS - WHKG

IV Pro Adapter – IV Pole Support – Patient Right Installation ¬With Knee Gatch

511-00-UN-RHS - KG

STRYKER MX-PRO OPTIONS

DESCRIPTION

OPTION PART NUMBER

Clamp block for the Stryker MX-PRO Cot/Stretcher – Patient Right Installation

530-10-MXPR

Clamp block for the Stryker MX-PRO Cot/Stretcher – Patient Left Installation

530-10-MXPR-LFS

IV Pro Adapter for the Stryker MX-PRO Cot/Stretcher – Patient Right Installation

511-00-MXP-RHS

IV Pro Adapter for the Stryker/ MX-PRO Cot/Stretcher – Patient Left Installation

511-00-MXP-LFS

WARNING

Do not modify the arm or any components of the system. Modifying the product can cause unpredictable operation

resulting in injury to the patient or operator.

Summary of Contents for SAFETY ARM SYSTEM 500































































Search results

Summary of Contents for SAFETY ARM SYSTEM 500

Reviews:

Related manuals for SAFETY ARM SYSTEM 500

Brands by name

Popular brands

TECHNIMOUNT SAFETY ARM SYSTEM 500, User Manual

Search results

Summary of Contents for SAFETY ARM SYSTEM 500

Reviews:

Related manuals for SAFETY ARM SYSTEM 500

Brands by name

Popular brands