MJS7T
06/4/07
Capacity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.Ton.
.
Low.Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1/4"
Raised.Height . . . . . . . . . . . . . . . . . . . . . . . . . 15-1/2"
Base. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9".x.9".
Height.Intervals:. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2".
Shipping.Weight. . . . 15 .75.lbs ..each.(shipped.as.pair)
SPECIFICATIONS
• Operating Instructions • Warning Information
• Parts Breakdown
This operaTing
manual conTains
imporTanT safeTy
informaTion. read
carefully and
undersTand all
informaTion before
operaTing Tool.
save This manual
for fuTure use.
Copyright © Professional Tool Products, 2007
All rights reserved.
MJS7T
7 Ton Pin
Jack Stand
(Pair)
Study, underStand and follow all inStructionS before operating thiS
device.
do not exceed rated capacity. uSe only on hard level SurfaceS.
center load on Saddle. uSe a matched pair to Support one end of a vehicle
only.
StandS are not to be uSed to SimultaneouSly Support both endS or one
Side of a vehicle.
no alterationS Shall be made to thiS product.inSpect each Stand to be Sure
it iS in good condition before uSe.
failure to heed theSe warningS may reSult in perSonal injury and/or
property damage.
rev. aSme pald-2003
