Operation & Maintenance Manual
CD-135 / CD-155
OM-02-02
Chapter:
Issue:
Issue date:
Page:
Content:
02-OM-06-02
4
30.07.2014
62
74
Revision no.:
Revision date:
7
20.07.2016
8.
Attach the new aluminum sealing ring to the filter cap
(see Fig. 6.51, item b).
9.
Remount the filter cap and tighten it to the specified
tightening torque.
Tightening Torque:
30 Nm
10.
Loosen the oil filler screw and remove it. (Fig. 6.49, item a).
11.
Fill in 1 liter new gearbox oil.
12.
Remount the oil filler screw with a new sealing ring and
tighten it to the specified tightening torque.
Tightening Torque:
35 Nm
13.
Preset the proportional pressure reducing valve. Refer to
Chapter 72-10.05 of RM-02-02.
Fig. 6.52
Mounting direction of the oil filter
Note:
Make sure that the spring in the filter cap is fixed.
CAUTION:
Do not overfill the gearbox!
CAUTION:
Use only gearbox oil which is specified in Chapter 3, Section
3.5, Page 3 of this Manual.
Note:
Before refilling, shake the gearbox oil bottle, in order to mix the
gearbox oil and the additives.
