Operation & Maintenance Manual
CD-135 / CD-155
OM-02-02
Chapter:
Issue:
Issue date:
Page:
Content:
02-OM-06-02
4
30.07.2014
16
74
Revision no.:
Revision date:
7
20.07.2016
Annex 5
Exchanging the Engine Oil and Oil Filter
1.
Allow the engine to warm up,
refer to Chapter 4.2 and Chapter 4.3 of this manual.
2.
Drain the engine oil from the oil sump by unscrewing the
drain plug (a) and allow the oil to drain. See Fig. 6.1.
WARNING:
The engine warm-up must be conducted in a secure that is
protected from the unauthorized movement of personnel!
Any rotating propeller is a potential safety hazard that can cause
severe personal injuries or even death!
CAUTION:
After the engine has been warmed up, shut down the engine.
Refer to Chapter 4.7 of this manual.
CAUTION:
The regulations regarding the disposal of waste oil must be
observed. Never discharge waste oil into the sewage system or
to the ground.
Note:
A sample of the oil and the used oil filter must be labeled, stored
in a clean container and made available to Technify Motors
GmbH on request for the complete engine life time. The label
must show the aircraft serial number, registration number,
engine serial number, operation time and date.
Quantity of oil sample: 100ml
Fig. 6.1
Oil drain plug
a Oil drain plug
a
