42
2.
Touch the clould icon
to prompt up the Remote sever
3.
Enter in the Remote sever IP and use the 4900 default for the
Port.
4.
If the connection is successful a Green Clould should appear.
5.
Use any TCP/IP tool setup as a server to remotely retrived.
@<Program Number>
6.
Use any TCP/IP tool setup as a server to remotely update.
#<Program Number>#<Profile Data>
Profile Data example:
#
1
#{"cycleCount":"6012","delay":"1000","dutyCycle":"7",
"dwell":"300","fallTime":"300","mode":0,"nozTemp":"25,
"nozTempState":false,"programValue":
1
,"riseTime":"300",
"totalCycles":"500"}
7.
Change any of the highlighted value to the desired
setting and update the program.
Note: Dot mode it is
0, and line mode it is 1. Heater Off is false On is
True and make sure the
red
value matches.
