10
Step 5:
•
Use the nozzle adjustment tool
to
securely
tighten
the
assembly.
Step 3:
•
Install the nozzle insert (7) to
the nozzle bushing.
Caution
:
the smaller end of the nozzle
inserts faces outward.
•
Place the bushing/nozzle insert
assembly
on
the
nozzle
installation tool in the vertical
position to prevent the nozzle
insert from dropping out.
Step 4:
•
Slowly
screw
the
nozzle
adjustment
nut
into
the
bushing/nozzle insert assembly.
Caution
: Continue to hold the
assembly in the vertical position
while
hand-tightening
the
nozzle adjustment nut.
Step 6:
•
Screw the nozzle unit (nozzle
bushing, nozzle insert and
adjustment nut) to the fluid
manifold by hand (or use the
nozzle adjustment tool) for
about 3-4 turns only.
•
Mount the valve on the XYZ
table
