tecan Te-Stack 10612251 Operating Manual Download Page 53

Page: 53 / 88

6 - Operation

Safety Instructions

Te-Stack Operating Manual, 391862, en, V2.3

6 - 1

Operation

Purpose of This

Chapter

This chapter gives instructions on how to operate the Te-Stack properly and
safely.

6.1 Safety Instructions

WARNING

Automatically moving parts.
Injuries (crushing, piercing) possible, if the safety covers are not in place.



Before starting the Te-Stack, check if the instrument’s safety panel is closed.



Never operate the instrument without covers.

6.2 Switching the System On

Note:

Since the Te-Stack is an option to the Freedom EVO (and possibly a Te-

MO) and powered via the Freedom EVO, we use the term “system”. System
refers to Freedom EVO, (Te-MO), and Te-Stack.

6.2.1 Checks Before Switching On the System

Note:

The Te-Stack is always used together with other instruments. Refer to the

corresponding manuals for checks before switching the system on.



As requested, refill (or empty) and mount all stacker columns



Empty the waste.



Continue with chapter

6.2.2 “Switching On”,



6-2

Summary of Contents for Te-Stack 10612251

























































































Search results

Summary of Contents for Te-Stack 10612251

Reviews:

Related manuals for Te-Stack 10612251

Brands by name

Popular brands

tecan Te-Stack 10612251, Operating Manual

Search results

Summary of Contents for Te-Stack 10612251

Reviews:

Related manuals for Te-Stack 10612251

Brands by name

Popular brands