tecan Te-Stack 10612251 Operating Manual Download Page 70

Page: 70 / 88

8 - 2

Te-Stack Operating Manual, 391862, en, V2.3

8 - Troubleshooting

Troubleshooting Table

8.1 Troubleshooting Table

Trouble-

shooting by the

Operator

The following table lists problems and errors and instructs how to eliminate them.

Tab. 8-1

Troubleshooting table

Problem / error

Possible cause

Corrective measures

Te-Stack (base unit)

Microplates dropped or
picked up incorrectly.

The Te-Stack position
is incorrect.

The microplates do
not meet the SPS
standard.

The plate type specifi-
cation is incorrect.

Teach the position.
Refer to the “Instrument Software Manual”

Always use microplates meeting the SPS
standard.

Correct the specification.

Stack for microplates

Microplate gets stuck

Microplates are
loaded incorrectly.

The grippers got
stuck.

The solenoid is defec-
tive.

Adjust the microplates.

Check the gripper mechanism.
If the problem cannot be solved, contact the
Tecan FSE.
Contact the Tecan FSE.

Stack for DiTi boxes

DiTi box gets stuck.

DiTi boxes are loaded
incorrectly.

The grippers got
stuck.

The solenoid is defec-
tive.

Adjust the DiTi boxes.

Check the gripper mechanism.
If the problem cannot be solved, contact the
Tecan FSE.
Contact the Tecan FSE.

Summary of Contents for Te-Stack 10612251

























































































Search results

Summary of Contents for Te-Stack 10612251

Reviews:

Related manuals for Te-Stack 10612251

Brands by name

Popular brands

tecan Te-Stack 10612251, Operating Manual

Search results

Summary of Contents for Te-Stack 10612251

Reviews:

Related manuals for Te-Stack 10612251

Brands by name

Popular brands