tecan Te-Stack 10612251 Operating Manual Download Page 76

Page: 76 / 88

10 - 2

Te-Stack Operating Manual, 391862, en, V2.3

10 - Disposal

Disposal of the Instrument

10.3 Disposal of the Instrument

EC Directive

WEEE

The European Commission has released the Directive on Waste Electrical and
Electronic Equipment (WEEE; 2002/96/EC).
Since August 2005, producers have been responsible for taking back and
recycling electrical and electronic equipment.

ATTENTION

Negative environmental impacts associated with the treatment of waste.



Do not treat electrical and electronic equipment as unsorted municipal waste.



Collect waste electrical and electronic equipment separately.

WARNING

Depending on the applications, parts of the Te-Stack may have been in contact
with biohazardous, poisonous or even radioactive material.



Make sure to treat this material according to the applicable safety standards
and regulations.



Always decontaminate the parts before disposal.

How to Dispose

of the Te-Stack

For the disposal of the Te-Stack please contact your local service organization.

Summary of Contents for Te-Stack 10612251

























































































Search results

Summary of Contents for Te-Stack 10612251

Reviews:

Related manuals for Te-Stack 10612251

Brands by name

Popular brands

tecan Te-Stack 10612251, Operating Manual

Search results

Summary of Contents for Te-Stack 10612251

Reviews:

Related manuals for Te-Stack 10612251

Brands by name

Popular brands