tecan Te-Stack 10612251, Operating Manual

Page: 65 / 88

7 - Preventive Maintenance
Maintenance Tasks
Te-Stack Operating Manual, 391862, en, V2.3 7 - 3
7.3 Maintenance Tasks
7.3.1 Safety Instructions
WARNING
Chemical, biological and radioactive hazards can be associated with the
substances used or the samples processed with the Te-Stack.
The same applies to waste disposal.

Always be aware of possible hazards associated with these substances.

Use appropriate protective clothing, safety goggles and gloves.
WARNING
Potential mechanical hazard

Mount and close all covers before switching on the instrument.

Keep out of the moving areas during the time the instrument is switched on.

Also pay attention to the safety instructions of the superior instrument.
7.3.2 Keeping the Logbook
Fill in the necessary or required data in the forms of the logbook, each time a
periodic maintenance task has been carried out.
7.3.3 Cleaning the Te-Stack
How to Clean To clean the instrument, proceed as follows:
1 Clean parts with isopropanol cleaning agent, with bleach or an antiseptic
solution (refer to chapter
7.1 “Tools and Consumables”,

7-1 ).
ATTENTION
Cleaning agents that contain strong acid could damage the surface of the
worktable.
Do not use such cleaning agents.
2 Remove any residues or foreign material from the chassis of the Te-Stack.