tecan Te-Stack 10612251 Operating Manual Download Page 16

Page: 16 / 88

2 - 2

Te-Stack Operating Manual, 391862, en, V2.3

2 - Safety

Notices and Symbols

2.2 Notices and Symbols

2.2.1 Warning Notices Used in This Manual

The symbols used for safety-related notices have the following significance:

WARNING

Symbols

WARNING notices appear as follows:

WARNING

Generally, the triangular warning symbol indicates the possibility of personal injury
or even loss of life if the instructions are not followed.

Whenever possible, the symbol indicates the hazard a person is exposed to more
specifically. The symbols used in this Operating Manual

have the following

significance:

WARNING

Toxic substances

WARNING

Biological hazard

WARNING

Radioactive radiation

WARNING

Fire hazard

WARNING

Pinch point, mechanical hazards

WARNING

Laser hazard

Summary of Contents for Te-Stack 10612251

























































































Search results

Summary of Contents for Te-Stack 10612251

Reviews:

Related manuals for Te-Stack 10612251

Brands by name

Popular brands

tecan Te-Stack 10612251, Operating Manual

Search results

Summary of Contents for Te-Stack 10612251

Reviews:

Related manuals for Te-Stack 10612251

Brands by name

Popular brands