tecan Te-Stack 10612251 Operating Manual Download Page 20

Page: 20 / 88

2 - 6

Te-Stack Operating Manual, 391862, en, V2.3

2 - Safety

Product Safety

WARNING

Class 2 Laser Product pursuant to IEC 60825-1:2007

"Complies with 21 CFR 1040.10 except for deviations pursuant to Laser
Notice No. 50, dated June 24, 2007"

ATTENTION



Unsafe operating condition and wrong measuring results in the process, if the
system is leaking.



If liquid is dripping from the tips or other parts of the liquid system, the Te-
Stack must not be operated any more.

Operation may only be resumed if the necessary maintenance or repair work has
been performed and the proper condition of the system has been verified.

Fig. 2-3

Class 2 Laser Product

LASER RADIATION

DO NOT STARE INTO BEAM

CLASS 2 LASER PRODUCT

Summary of Contents for Te-Stack 10612251

























































































Search results

Summary of Contents for Te-Stack 10612251

Reviews:

Related manuals for Te-Stack 10612251

Brands by name

Popular brands

tecan Te-Stack 10612251, Operating Manual

Search results

Summary of Contents for Te-Stack 10612251

Reviews:

Related manuals for Te-Stack 10612251

Brands by name

Popular brands