tecan Te-Stack 10612251, Operating Manual

Page: 63 / 88

7 - Preventive Maintenance
Tools and Consumables
Te-Stack Operating Manual, 391862, en, V2.3 7 - 1
7 Preventive Maintenance
Purpose of This
Chapter
This chapter gives instructions on all maintenance work to be performed in order
to keep the Te-Stack in good working condition.
In addition to this, adjustment and repair jobs the operator can carry out by
himself/herself are explained.
Principle Only operate the Te-Stack when it is in good working condition. Strictly observe
the maintenance instructions as set out in this manual. To achieve specified
performance and reliability of the instrument, regularly carry out the maintenance
and cleaning tasks.
In case of any problems and for inquiries contact the local service organization.
Additional
Documents
Carried out maintenance can be recorded to be kept in the logbook of the
instrument:
Further required documents:

“Instrument Software Manual”
7.1 Tools and Consumables
WARNING
Fire hazard.

Do not use flammable liquids without supervision by the operator.

Take measures to prevent electrostatic discharge.
Material Needed
for Maintenance To perform the maintenance tasks described in this Operating Manual, the
following tools and consumables must be available:

Standard tools
–
Set of allen keys
– Set of screw drivers

Special tools and devices
–
Soft lint-free Kleenex tissues
– Cotton buds

Consumables
–
70% isopropanol cleaning agent
– 70% ethanol cleaning agent
– De-ionized water
– Microplates in 96-well format
– Bleach (up to 1%; at most 2.5% NaOCl)