6-50
EO18-33003A
6. DIAG. TEST OPERATION
NOTES: 1. Total paper distance covered (TL FEED) and the adjustment value for the sensors
cannot be cleared.
2. Data stored on the flash memory card cannot be cleared with this procedure. To clear
data on the flash memory card, send the format command to ini tialize the card. For
details, refer to the Expansion I/O Interface Specification.
3. For data to be cleared in the RAM clear mode, refer to the RAM clear mode table.
4. After RAM clear is performed, the threshold setting value will turn to the default (0).
When using pre-printed labels, be sure to set the threshold after referring to the
Owner’s Manual.
(Revision Date: Aug. 8, 2000)
6.8 RAM CLEAR MODE (When using the KB-80-QM optional keyboard)
Function
Mode Name
PARAMETER CLEAR
Item
X axis fine adjustment
Character code selection
Font zero selection
Code 5CH selection
Transmission control mode
Control code selection
Strip wait status setting
Status response
Threshold manual fine
adjustment for the black
mark sensor
Threshlod manual fine
adjustment for the feed gap
sensor
Label pitch
Effective printing length
Effective printing width
Sensor type
Feed speed
Issue mode
PC save automatic calling
Kanji code selection
Feed speed adjustment
value (on the PC)
Feed speed adjustment
value (on the printer)
Euro code
True type font block
PC Save BLOCK
Bitmap writable character
BLOCK
Initial Value
0 mm
PC-850
“0” (without slash)
“\”
XON + READY Auto
mode
Auto
OFF
ON
1.0 V
0.7 V
76.2 mm (B-452-TS)
104.8 mm (B-452-HS)
74.2 mm (B-452-TS)
99.8 mm (B-452-HS)
105.7 mm (B-452-TS)
103.6 mm (B-452-HS)
Transmissive sensor
(Feed gap sensor)
2 inch/sec.
Standard
(Batch printing)
ON
Type 1
0%
0%
B0H
Not initialized
Not initialized
Not initialized
